FBT VERTUS CLA-208SA

Pozovite za najbolju cijenu

NAVEDENA CIJENA JE ZA BAS BIN !!!

FBT Vertus 208SA je aktivni subwoofer u bass – reflex dizajn. Vertus koristi 2 x 8 “ ( 200mm ),  high – izletnički woofer sa 2″ (50 mm) zvučna zavojnica daje 50 Hz do 180Hz frekvencijski odziv . Vertus koristi klasa D 600W RMS pojačalo s prekidačem izvora energije . Vertus ima DSP sa 4  memorijske i upravljačku ploču s kombiniranom XLR / jack stereo ulaz i link, XLR Hi- pass out liniju, volumen, gotove konfiguracije , 0 ° -180 ° fazni prekidač, status LED i Neutrik POWERCONN ulaz.

FacebookTwitter
Kategorija:

Opis

Processed Active Subwoofer

FBT VERTUS CLA was created with the thought of integrating professional line array technology in an extremely compact and elegant speaker column.

Compared to the traditional two-way speakers, the sound is distributed much more evenly throughout the audience, both in outdoor and in indoor environments acoustically difficult or reverberating as well. The CLA cylindrical wave front boasts the pleasant effect of present and precise forwardly projected sound. Even acoustic feedback towards microphones is reduced.

VERTUS CLA is a light and compact modular line array system created for both live and fixed installations, comprised by two products:

  • CLA 604a: bi-amp two-way active column speakers 400 + 100W RMS
  • CLA 208Sa: active subwoofer 600W RMS

VERTUS CLA is a true professional line array system that can satisfy the musician looking for a compact PA solution, easily to carry, modular, ready to use in just minutes with no-compromise quality. It is capable of being integrated into any environment or installation requiring high-quality sound and controlled directional characteristics. 

 

600W RMS 129dB SPL Processed Active Subwoofer

  • Active subwoofer in bass-reflex design
  • 2 x 8″ (200mm) custom neodymium, high-excursion woofer with 2″ (50 mm) voice coil
  • 50Hz to 180Hz frequency response
  • Class D 600W RMS amplifier with switch mode power supply
  • DSP processor with 4 available presets
  • Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
  • Neutrik POWERCONN input and link
  • 15mm birch plywood enclosure with anti-scratch paint finish, stackable
  • M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules
  • Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance
  • Vertus is also available in white colour
  • Active subwoofer in bass-reflex design
  • 2 x 8″ (200mm) custom neodymium, high-excursion woofer with 2″ (50 mm) voice coil
  • 50Hz to 180Hz frequency response
  • Class D 600W RMS amplifier with switch mode power supply
  • DSP processor with 4 available presets
  • Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
  • Neutrik POWERCONN input and link
  • 15mm birch plywood enclosure with anti-scratch paint finish, stackable
  • M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules
  • Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance
  • Vertus is also available in white colour
Configuration: 1 way
Built-in amplifier LF/HF: 600 W RMS
Built-in amplifier peak LF/HF: 1200 W
Frequency response: 50Hz – 180Hz -6dB
Low Frequency woofer: 2 x 8″ – 2″ coil inch
Maximum SPL cont/peak: 125/129 half space dB
Dispersion: Omnidirectional HxV
Input impedance: 22 Kohm
Crossover Frequency: 0.15 KHz
AC Power requirements: 450 VA
Input connector: stereo XLR with loop,HP out
Power cord: 5 m/ft
Net Dimension (WxHxD): 550x270x500 mm/inch
Net Weight: 20 / 16.4 kg/lb
Transport Dimension (WxHxD): 690x370x625 / 21.7×10.6×19.7 mm/inch
Transport Weight: 23.5 / 51.80 Kg/lb